 MicroBiz CD Rom DOS Installation Instructions
1. From the DOS prompt, type the CD ROM drive letter followed by : and press
2. At the CD ROM drive, type "INSTALL" and press
3. The Controller menu will appear. Select an option by either using the prefix letter or the arrow keys and press 4. After selecting the option, enter the target drive to where the files are going to be installed. 5. Once the files are finished copying, you will return to the MENU, 6. Exit the menu by typing Q. TO RUN THE PROGRAM: 1. Go to DOS. 2. Switch to the directory where the program will be run from. (see selection below)
3. Type the program name and press
MicroBiz CD Rom Demo Windows Instructions 1. Place the CD ROM disk in the CD ROM drive. 2. At the Windows 95 desktop, click on the START button. 3. Click on the Run option in the START menu. 4. Type in "x:\BUSWIN\DISK1\SETUP.EXE" press ENTER. NOTE: x = your CD ROM drive letter. 5. A window will appear as "Welcome to the Business Controller Plus Version (x) installation program." It wii prompt you to click continue to proceed with the installation or to click exit setup to quit. 6. You will now be prompted to enter your name and organization. 7. The screen will tell you that it is SEARCHING FOR INSTALLED COMPONENTS. 8. The next window will ask you to choose a directory. The default directory is C:\BIZWIN. Click on OK if this is where your BUSINESS CONTROLLER SOFTWARE is located. If not, click CHANGE DIRECTORY. If you opt to change your directory, a new screen will prompt you to change the path. Change your path to x:\BUSINESS and click OK. You will now return to the previous screen. Click OK. 9. Once clicked the screen will display SETUP IS SEARCHING FOR INSTALLED COMPONENTS. 10. Begin the installation by clicking the large INSTALL BUTTON. 11. Setup will add items to the group shown in the program group box. You may change the program group if needed. 12. Click OK. The screen will flash that SETUP IS CHECKING FOR DISK SPACE. 13. The screen will now display a percentage task bar showing the progress of the installation. 14. A window will display SETUP DATA PATH /LOCATION. Continue. 15. The next screen will display DATA PATHS SET UP IS DONE. 16. SETUP WAS COMPLETED SUCCESSFULLY will appear on your screen after the installation has finished. 17. You can open the program by clicking on the MicroBiz BUSINESS CONTROLLER PLUS icon or by clicking on the Windows START button, open PROGRAMS, and then open MicroBiz BUSINESS CONTROLLER PLUS. To run the Windows Program, you must have an installed copy of the Business Controller or Easy Business Controller. Important Notes The "demo" versions are the same as the "live", except that they are limited to about thirty customers and one hundred products and will only run for about two hours at a time. The "live" versions will not start and run without a keyblock. The keyblock attaches to the parallel port and only comes when you purchase the live version. The demo versions can be run multi-user. The Business demo has a main menu option called Tech Support. In there are a selection of technical notes to help you with the program. The programs should have about 530K of free memory to run. To find out how much free memory you have, type MEM at the DOS prompt. If you have less than 530K free, try moving some things to upper memory. Programs can be configured to support various printers by going into the Customize section of the main menu. Do NOT turn on options that you do not have. If you do not have a cash drawer hooked up to your computer, do not turn that option on. Doing so will cause an error message to appear on your screen. Have a question about point-of-sale hardware or MicroBiz software? Visit the MicroBiz WebBoard. Click here to print this page |
|