Skip to: main content
Click Here For Live Help

Percon PT2000 part II

How to Interface the Percon PT2000 Portable Data Collector

The unit has the same function as the AM3000 data collector, the only difference is the Percon has to be modified to work with MicroBiz.

The first step is to change the Percon Program Generator (PPG):

connect the serial cable (part #00-884-19) 25 pins, to com2 or com1, and the other end to the unit.

Turn the unit on.

  1. Place the mbzppg diskette into A or B drive. At the prompt type:
    PDPROG MICROBI4.HEX /2 (Enter) (/2 is for com2)
  2. When the upload is complete, the unit will prompt you to enter the date. If the date is correct, just press the enter key (red key).
  3. Unplug the keyboard from the computer, and put the Y cable into the keyboard port (part #00-001-00) (one end is a 25 pin Dtype male, and the other end around shape female connector for the keyboard).
  4. Connect the short black cable (part #00-884-20) to the 25 pin male and the other side to the Percon 15 pin female.

Now you are ready to scan inventory items and upload your data.

Serial Communication

PARAMETER SETTING

baud rate 9600

data bits 8

parity none

stop bit 1

ACK/NAK protocol On

XON/XOFF Off

End of Record 0d <CR>

This enables the Portable to send and receive data to the serial port.

Percon cable #00-884-19 Wedge communication you need Percon cable

# 00-001-00 # 00-884-20 Plus MicroBiz Percon Program Generator.

If the file is downloaded from the MicroBiz BBS (PERCON4.EXE) , it must first be extracted (in a temporary directory) and then copied to a diskette.

If you require technical support on the Percon unit, please contact your reseller directly. Do not contact MicroBiz unless you purchased the unit from us.

Have a question about point-of-sale hardware or MicroBiz software? Visit the MicroBiz WebBoard.

Click here to print this page

Home    Browse    Specials    Store Information    Sitemap
Copyright © 2008 All rights reserved by MicroBiz Corp.
Features and prices are subject to change without notice.
MicroBiz is a registered trademark of CAM Commerce Solutions.
E-commerce Powered By iSTAR